Current per 1 LED (mA)

Current of 1 LED in segment (mA) Current of LED in 1 segment.

Dimming system

Durability

Programmable

Dimmable

Lm per meter (Lm)

Dimming method

LED package type

Product optionally produced in colour We are able to produce your selected design, in the following colour / spectral properties.

Light source

Surface colour

Output current (mA)

Max. power Voltage (V)

Electrical protection

PWM Nie, 8bit, 10bit,15bit,16bit

IP degree

Input Voltage (power supply)

Light distribution Type (diffuser)

Outer jacket diameter (mm) Diameter of outer jacket (mm)

LED chip manufacturer

Output Voltage (V)

Viewing angle (°)

Cuttability (mm)

El. power (BOOST) (W) El. power in BOOST / Enhanced mode

Total el. power (W)

Colour temperature (primary light source) (K) Correlated Colour Temperature CCT (K) of primary light source : is basically a specific numerical measurable definition of light colour of White spectrum according to black body curve (for example 2700K is Warm white Incandescent light, 3000K is wartm white too, but rather of halogene spectrum, but slightly more coldish etc.

Colour temperature (secondary light source) (K)

Colour rendering index CRI

Lx per meter (Lx)

Max. Length when feed from 1 side (m)

Max. Length @ power (Utyp2) (m)

Max. power dissipation (W)

Max. Fibre optic length (m)

Installation profile width

Max. current allowed (ma)

Minimum Voltage (V)

Minimum number of LEDs in shortened semgent MASTER LED strips has advantage to shorten the last segment to different number than standard 6 or 7. After shortening the last segment the SP solder shortening pad should be soldered with tiny amount of solder.

Luminous flux (Lm)

Optical atuenation (dB)

LED axial distance (mm)

No. of LEDs/m (ks)

Temperature increase in working condition (°C) Temperature increase caused by el. device heat up while working in normall operation.

Port diameter (mm)

Constant Current Drivers

Middle wavelength (nm)

Luminoux Flux (BOOST) (Lm) Luminoux flux in BOOST /Enhanced mode

PCB width (mm)

Profile type

Light type

Input voltage (Power supply)

Typical Power Current (Luminaire) (mA)

Typical power current (power supply) (mA)

Typical Power Voltage (power supply) (V)

Fibre optic topology

Port Active surface area for fibres (mm2)

Active diameter of 1 fibre (mm)

Certificates

Remote Controll

LED strip length on the reel (m)

Features / Additional advantages

Range (m)

Optic typology

Fibre optic transmission type

Effect

External power supply included

Features

Cooling

IK protection

Category of solution

Compatibility with MASTER LED strips Compatibility with MASTER LED strips

Dimming curve

Case

Lx@Cube (Lx) Intenzita (Lx) 100mm pasiku meraná luxmetrom v uzavretej čiernej kocke 100x100x100mm pri Utyp. LED pás je položený v strede plochy na bielom matnom stole, Luxmeter na vrchu kocky v osi.

Magnetic power (Kg)

Surface material

Max. ambient temperature - TaMax (°C) Maximum allowable ambient temperature in which the product is safe to run.

Max. wire crossection (stranded) (mm2)

Max. výstupné napätie (V) Max. výstupné napätie (V)

Max. load (t)

Max. allowed input Voltage (V)

Maximum number of LEDs connected This parameter is used mainly for current drivven LEDs (CC) and its power supplies. Power supply has certain minimum and maximu output voltage. The LED string connected to the output should be between these 2 limits. Calculation is carried for LED voltage 3,2V.

Max. allowed current ImaxCC (mA)

Min. no. of powered LEDs This parameter is used mainly for current drivven LEDs (CC) and its power supplies. Power supply has certain minimum and maximu output voltage. The LED string connected to the output should be between these 2 limits.Calculation is carried for LED voltage 3,2V.

Min. output voltage (V)

Min. electrical power (W)

Max. current (mA)

Fibre optic diameters mix

Mounting depth (mm)

Mounting hole (mm)

Power supply Included

UV resistant

Outer sleeve

Optic

Tilt

Memory

Connection socket

MCPCB PCB pre LED

PFC filter PFC filters significantly reduces the electromagnatic interference and prolongs electronic devices

Max. no. of LED BINs used in product