Current per 1 LED (mA)

Dimmable

Dimming method

LED package type

Product optionally produced in colour We are able to produce your selected design, in the following colour / spectral properties.

Max. power Voltage (V)

IP degree

Input Voltage (power supply)

LED chip manufacturer

Viewing angle (°)

Cuttability (mm)

Total el. power (W)

Colour temperature (primary light source) (K) Correlated Colour Temperature CCT (K) of primary light source : is basically a specific numerical measurable definition of light colour of White spectrum according to black body curve (for example 2700K is Warm white Incandescent light, 3000K is wartm white too, but rather of halogene spectrum, but slightly more coldish etc.

Colour rendering index CRI

Lx per meter (Lx)

Max. Length when feed from 1 side (m)

Max. Length @ power (Utyp2) (m)

Max. current allowed (ma)

Minimum Voltage (V)

Minimum number of LEDs in shortened semgent MASTER LED strips has advantage to shorten the last segment to different number than standard 6 or 7. After shortening the last segment the SP solder shortening pad should be soldered with tiny amount of solder.

Luminous flux (Lm)

LED axial distance (mm)

No. of LEDs/m (ks)

Temperature increase in working condition (°C) Temperature increase caused by el. device heat up while working in normall operation.

Constant Current Drivers

PCB width (mm)

Light type

Typical Power Voltage (power supply) (V)

Certificates

LED strip length on the reel (m)

Features / Additional advantages

Max. no. of LED BINs used in product