This miniature and yet powerful LED illuminator is intended for the powerful applications using optic fibre systems. Its high intensity of light output makes it ideal for use with sideglow applications and long distance endglow fibre system. Its active cooling system using the state-of-art ventilation system makes a minimum noise (16dB), which is great especially for low level applications such as private places. Device is regulated by a microcontroller that continuously detects its maximum allowance temperature (48°C). When reaching this borderline the device is automatically turned off and cooled down and repeatably turned on when safe. Thanks to this feature the overall lifespan reaches much longer operating hours than any other temperature non-controlled units. This does not mean that there is no need to prevent high surrounding temperatures at the installation point! Good ventilation system should be secured at all times and for all electrical devices!
Since the light output is so strong, the optical port and hence optic fibres have to be polished to the glass-like finish, otherwise you run a high risk of fibres being melt down and limiting the light emittance to a minimum. Never look into the LED illuminator directly nor point at any life objects whilst the device is in operation!
LED illuminator requires a stable 24VDC input for its proper cooling and protective electronics' functioning so always make sure that there is no other voltage input than 24VDC. For the dimming and controlling purposes based on 24V constant voltage power systems and 24VDC PWM systems there is a separate input on the device so you can easily control its individual channel/s dimming.
Since the light output is so strong, the optical port and hence optic fibres have to be polished to the glass-like finish, otherwise you run a high risk of fibres being melt down and limiting the light emittance to a minimum. Never look into the LED illuminator directly nor point at any life objects whilst the device is in operation!
LED illuminator requires a stable 24VDC input for its proper cooling and protective electronics' functioning so always make sure that there is no other voltage input than 24VDC. For the dimming and controlling purposes based on 24V constant voltage power systems and 24VDC PWM systems there is a separate input on the device so you can easily control its individual channel/s dimming.
| Property | Value |
| Total el. power | 30 W |
| Colour rendering index CRI | 80 |
| Electrical protection | External NTC thermistor, Polarity protection, Over temperature protection, ESD protection <2KV |
| Maximálne napájacie napätie Maximálne napájacie napätie, ktorým je možné napájať zariadenie, bez toho aby došlo ku poruche. Používajte iba krátkodobo. | 28 V |
| Typical Power Voltage (power supply) | 24 V |
| Port diameter | 32 mm |
| Colour temperature (primary light source) Correlated Colour Temperature CCT (K) of primary light source : is basically a specific numerical measurable definition of light colour of White spectrum according to black body curve (for example 2700K is Warm white Incandescent light, 3000K is wartm white too, but rather of halogene spectrum, but slightly more coldish etc. | 4000 K |
| External power supply included | No |
| Remote Controll | Not available |
| Enviroment temperature | 50 °C |
| Input voltage (Power supply) | DC CV |
| Light type | NW-Neutral White |
| Replaceable optic | No |
| Dimmable | Yes |
| Cooling | Active |
| Changeable output parameter | Power |
| Programmable | Yes |
| Light source | LED |
| IP degree | IP20 |
| IN/OUT terminals | Connector |
| Including Light source | Yes |
| Suitable for exterior and moist areas | No |