Current per 1 LED (mA)

Dimmable

Lm per meter (Lm)

Dimming method

LED package type

Product optionally produced in colour We are able to produce your selected design, in the following colour / spectral properties.

Light source

Surface colour

Max. power Voltage (V)

IP degree

Input Voltage (power supply)

Light distribution Type (diffuser)

Outer jacket diameter (mm) Diameter of outer jacket (mm)

LED chip manufacturer

Viewing angle (°)

Cuttability (mm)

Colour temperature (primary light source) (K) Correlated Colour Temperature CCT (K) of primary light source : is basically a specific numerical measurable definition of light colour of White spectrum according to black body curve (for example 2700K is Warm white Incandescent light, 3000K is wartm white too, but rather of halogene spectrum, but slightly more coldish etc.

Colour temperature (secondary light source) (K)

Colour rendering index CRI

Lx per meter (Lx)

Max. Length when feed from 1 side (m)

Max. Fibre optic length (m)

Max. current allowed (ma)

Minimum Voltage (V)

Minimum number of LEDs in shortened semgent MASTER LED strips has advantage to shorten the last segment to different number than standard 6 or 7. After shortening the last segment the SP solder shortening pad should be soldered with tiny amount of solder.

Luminous flux (Lm)

LED axial distance (mm)

No. of LEDs/m (ks)

Temperature increase in working condition (°C) Temperature increase caused by el. device heat up while working in normall operation.

Port diameter (mm)

Constant Current Drivers

PCB width (mm)

Total el. power (W)

Light type

Input voltage (Power supply)

Typical Power Voltage (power supply) (V)

Fibre optic topology

Active diameter of 1 fibre (mm)

Certificates

Dĺžka LED pásu na rolke (m)

Features / Additional advantages

Fibre optic transmission type

Surface material

Fibre optic diameters mix

Outer sleeve

Connection socket

Počet BINov LED na výrobku Presnosť BINovania LED ovplivňuje kvalitu osvetlenia - ak bude výrobok osadený s LED, ktoré pochádzajú z rôznych BINov, je veľká šanca že napr. pri homogénnom/difúznom osvetlení budú jednotlivé rozdielnosti viditeľné - toto sa 10x znásobuje pri zalievaní.

No. of Fibre in total (ks)

Suitable for exterior and moist areas

Type

Type of plastics Type of plasts such as PE, PVC, PC, PMMA etc. Each type of plast has individual chemical and mechanical properties.

Fibre optic type

Fibre optic finish

Suitable for surface (m2)

Suitable for installation